Battery Installation - Steren RM-9 Manual De Instrucciones

1. QUICK INSTRUCTIONS
Remove the lid of battery compartment which is in the back
of the remote control. Place 2 AAA batteries, pay attention
to polarity
Replace the cover of the battery compartment again.
Turn on the device (TV, VCR, etc.) to be controlled. Press and hold the SETUP
1 2 3
button until the LED indicator remains on, then release SETUP button.
Press once the desired mode button (TV, VCR, etc.). The LED indicator blinks
off once.
1 2 3
1 2 3
Press and release the numeric button (0-9) corresponding to desired
4 5 6
manufacturer (see table on code list sheet), the led will turn off.
8 9
7
0
ENTER
Press the CH+ button repeatedly to verify that the RM-9 controls your device.
Press and release MUTE to install the code.
MUTE PIP TOGGLE REPEAT
When the programming step is finished, only press the button of the
device that you want to use, for example DVD, SAT, AUX, CBL, TV,
VCR or CD and use the RM-9 in a normal way.
4

BATTERY INSTALLATION

OPERATION
PROGRAMMING
2 3
1