6.3 Connections for the Base Station
Important Information:
! !
The connections for the Base Station may
only be made to the switched mode power pack
included with this starter set. Other switched mode
power packs or transformers may not be used!
The Base Station requires the power pack as a
source of power. Therefore, only the power pack
(1) with the cable (2) may be plugged into the
socket on the Base Station (3).
6.4 IR Controller
4 – Lens
5 – Function buttons
6 – Speed controller
7 – Changing direction / Train stop
8 – Light button
9 – Address selector switch
3
2
4
1
+
+
0
-
STOP
0
-
6.5 Operating the IR Control for the First Time
Before operating this controller for the first time,
2 type AAA batteries must be installed in the con-
troller. Please see the following illustration.
Unscrew the battery holder and lift up the cover.
Install 2 type AAA (micro size) batteries as shown
in the drawing.
! !
Insert or change batteries only in pairs!
Pay attention to polarity!
Notes about Batteries and Rechargeable
Batteries
• Batteries should only be used and replaced by
adults.
• Non-rechargeable batteries may not be char-
ged up.
• Exhausted batteries are to be removed from the
toy.
• Rechargeable batteries are to be removed from
the toy before being charged!
• Rechargeable batteries should be charged up
only under the supervision of adults.
13