Setting Preheating Alarm Light On/Off; Thermostat Adjustment - LG LRE3012ST Manual Del Propietário

SETTING PREHEATING ALARM
LIGHT ON/OFF
The interior oven light automatically turn on when the oven
door is opened.
When oven reaches set-temperature after preheat, the oven
notifies preheat-end by flashing oven lamp until door is
opened.
You can activate or deactivate smart oven light feature.
Default Setting is on.
To set smart oven light on/off
1. Press WARM pad for 3 seconds.
2. Press "4" pad. The display will
show "PrE On".
3. Press "4" pad to switch between
the "On" and "OFF".
4. Press START pad to accept the
change.
OPERATION (OPTIONS)
- 17 -

THERMOSTAT ADJUSTMENT

The temperature in the oven has been preset at the factory.
When first using the oven, be sure to follow recipe times and
temperatures. If you think the oven is too hot or too cool, the
temperature in the oven can be adjusted. Before adjusting,
test a recipe by using a temperature setting that is higher or
lower than the recommended temperature. The baking
results should help you to decide how much of an
adjustment is needed.
The oven temperature can be adjusted from -35°F(-19°C) to
35°F(19°C) .
The thermostat adjustments made with this feature
Note:
will just change Bake.
To increase the oven temperature:
1. Press and hold "BAKE" pad for 3
seconds.
2. To increase the temperature use
the number pads to enter the
desired change.
(Example 20°F : 2, 0).
"20°" will be displayed.
3. Press START to accept the
temperature change and the
display will return to the time of
day. Press CLEAR OFF to reject
the change if necessary.
To decrease the oven temperature:
1. Press and hold "BAKE" pad for 3
seconds.
2. To decrease the temperature use
the number pads to enter the
desired change.
(Example -20°F : 2, 0) and then
press BAKE pad once.
"- 20°" will be displayed.
3. Press START to accept the
temperature change and the
display will return to the time of
day. Press CLEAR OFF to reject
the change if necessary.