Component List; Technical Data; Noise Information - Worx WX845 Manual Del Usuario

COMPONENT LIST

1 OPERATING HANDLE
2 UPPER FIXED GUARD
3 MOTOR HOUSING
4 LOWER ROTATING GUARD
5 FOLDING WORK SUPPORTS
6 MOUNTING HOLES
7 KERF PLATE
8 MITER LOCKING HANDLE
9 MITER DETENT RELEASE
10 FRONT SUPPORT FOOT
11 MITER SCALE
12 FENCE
13 BLADE KEY
14 WORK-HOLDING LEVER
15 BEVEL SCALE
16 GUARD RETRACTION ARM
17 DUST PORT
12
18 TRIGGER SWITCH
19 LOCK-OUT LEVER
20 CUTTING DEPTH ADJUSTMENT SCREW
21 LOCK DOWN PIN
22 SLIDER LOCK KNOB
23 SLIDERS
24 BEVEL LOCK KNOB
25 WORK HOLDING LEVER RETAINING KNOB
26 BATTERY PACK *
27 BATTERY PACK RELEASE BUTTON *
28 LASER
29 LASER ON-OFF SWITCH
30 BLADE BOLT COVER (SEE FIG. C1)
31 BOLT COVER SCREW (SEE FIG. C1)
32 INNER FLANGE (SEE FIG. C2)
33 SAW BLADE (SEE FIG. C2)
34 OUTER FLANGE (SEE FIG. C2)
35 SPINDLE LOCK BUTTON (SEE FIG. C2)
36 DUST BAG (SEE FIG. F)
20V Sliding Miter Saw
* Not all the accessories illustrated or
described are included in standard delivery.

TECHNICAL DATA

Type WX845 WX845.9 (845 - designation of
machinery, representative of battery-operated
mitre saw)
WX845
Rated voltage
No load speed
Blade size
Cutting capacity
Mitre 0°/Bevel 0°
Mitre 0°/Bevel 45°
Mitre 45°/Bevel 0°
Mitre 45°/Bevel 45°
Bevel capacity
Mitre capacity
Machine weight
** Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal
voltage is 18 volts.

NOISE INFORMATION

A weighted sound pressure
A weighted sound power
K &K
pA wA
Wear ear protection.
The declared noise emission value has been measured
in accordance with a standard test method and may be
used for comparing one tool with another.
The declared noise emission value may also be used in
a preliminary assessment of exposure.
WARNING: The noise emissions during actual
use of the power tool can differ from the
declared value depending on the ways in which the
tool is used especially what kind of workpiece is
processed dependant on the following examples and
other variations on how the tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained.
The use of the correct accessory for the tool and
WX845.9
20 V Max**
3200/min
216mm
220 x 70 mm
220 x 41 mm
155 x 70 mm
155 x 41 mm
o
0~45
o
0~45 L&R
12.5kg 11.5kg
L = 92.2dB(A)
pA
L = 105.2 dB(A)
wA
3dB(A)
EN