Radio Indicators; Led Indicators; Audible Indicators - Tait TM8100 Guía Del Usario

Radio
Indicators
10 Getting Started
The LED indicators and the radio's audible tones all
combine to give you information about the state of your
radio. The way these indicators behave is affected by the
way your radio is programmed.
The following sections describe the most common opera-
tion of the radio indicators.

LED Indicators

LED Meaning
red glowing: your radio is transmitting
(transmit)
flashing: your transmit timer is about to
expire
green glowing: there is activity on the current
(receive and
channel, even though you may not be able
monitor)
to hear it
flashing: you have received a call with valid
special signalling, or you have activated
monitor or squelch override
amber glowing: your radio is scanning a group of
(scanning)
channels for activity
flashing: your radio has detected activity on
a channel, and has halted on this channel
function the operation of these leds depends on the
key LEDs
type of function programmed for each
function key

Audible Indicators

Your radio may be programmed so that whenever you
press a key, the radio beeps to indicate whether or not
your action is permitted.
A short, medium-pitched beep indicates that an action
or selection is permitted. A long, low-pitched beep indi-
cates that the action or selection is not permitted.