Best IM33I45SP Manual Del Usuario página 11

MOUNT.THE.RANGE.
HOOD.BODY
1. Tape the mounting template in place
and drill (5) 1/8" diameter holes at the
center locations shown. Fig. 8. When
complete remove template from ceil-
ing.
2. Loosen the body screws (Fig. 9.) and
adjust the Range Hood Body to the
desired length as noted in the table
on page 10.
3. If the unit is ducted, install the damper
on top of the blower with the flaps
swing up. Attach the ducting at the
required length to the blower and seal
with duct tape. Fig. 10. Skip to step 5.
BODY
SCREWS
- 11 -
MOUNTING
HOLES. (5)
FIG.. 8
RANGE
HOOD
BODY
HEIGHT
FIG.. 9
6". DUCT
DAMPER
FIG.. 10