Tabla de contenido
Idiomas disponibles
Idiomas disponibles
1 - INSTRUCTIONS FOR THE INSTALLER
1.1 - INSTRUCTIONS AND REQUIREMENTS FOR INSTALLING THE RECEIVER
E
Install the receiver at a height that allows the antenna to stick up above any nearby metal container (boiler, expansion tanks, metal
G
cabinets); avoid positioning the antenna near cables and electrical panels (fig. 1.i - fig. 2.i)
N
B
Cabinets, walls and slabs containing metal can limit the operation of the product
This system is incompatible with radio products working on the same frequency using a permanent
emission mode.
Important: installation and electrical connections of devices and appliances must be carried out by skilled people and
in compliance with current regulations. The manufacturer declines any liability in connection with the use of products
subject to special environmental and/or installation standards. Exemples given in the manual are purely indicative.
Instructions relative to the structure of realizable systems and the assignment of areas to individual
thermostats are shown in the technical documentation for the transmitter devices (chronothermostats and/or thermostats).
Dimensions
ON
1
2
RESET
133
Fig. 2.i
4
Example of installation with 2 zones
2 zone receiver
ON
ON
RESET
25
OK
ON
RESET
ON
NO
RESET
Fig. 1.i
Zone's
Burner
Zon 1
e
Wireless Chronothermostat
(Installation Master)
solenoid valves
.
chrono
thermostats or
ON
ON
+
Zone 2
Wireless Thermostat
(or Chronothermostat)
Tabla de contenido
