We've included two strips of Velcro, one with 3 pieces of
light gray Velcro and the other with 3 pieces of white
Velcro. You use one of each color, and the extras will let
you replace the Velcro if it starts to wear out.
Velcro Pad
Peel off one piece of gray Velcro and stick it on a clear,
preferably flat area on the same side of your iPod/MP3
player as the headphone jack. Remember, the further from
the jack the better, but it can't be more than 3.75 cm (1.5
inches) from the jack. Now peel off one piece of white
Velcro from the other strip, and carefully push the Velcro
side (NOT the sticky side) against the gray Velcro that you
already installed, so that the two pieces stay together.
Then plug in the Transmitter, being careful that it's straight.
Press it in place so that it pushes against the sticky side of
the white Velcro.
When you first do this, you should leave the Transmitter in
place for at least one hour before pulling the Transmitter
and audio device apart. To be safe, we recommend that
you leave them attached overnight.
If You Need Help
For assistance, please go to www.zoom.com and select
Technical Support. From here you can register your product,
contact our technical support experts, use our intelligent
database SmartFacts™, and/or get warranty information.
14