Preparing The Remote Control; Pairing The Remote Control; Battery - Home Decorators Collection 7984HDCAN Guía De Uso Y Cuidado

Preparing the Remote Control

Pairing the Remote Control

NOTE: The remote control has already been paired to the ceiling fan
for your convenience. If you have two of the same model fans in your
home, please follow the steps below to control each fan independently.
□
Remove the remote control battery cover by pressing firmly on the
arrow and sliding the cover off.
□
Install two 1.5V AAA batteries (M).
□
Slide the dip switch in the battery compartment to the "1" setting.
□
Confirm that the power to the fan is off at either the wall switch or
breaker box.
□
Return power to the fan at the wall switch or breaker box.
□
Press and release the "Learn" button located in the remote's battery
compartment within 30 seconds.
□
If pairing is successful, the fan's light kit will flash and the blades
will begin to spin.
□
Replace the battery cover on the remote control.
13
Please contact 1-800-986-3460 for further assistance.
HOMEDEPOT.COM/HOMEDECORATORS