Master Forge 0050772 Manual De Instrucciones página 28

CONVERSION INSTRUCTIONS
c. Adjust the air shutter 1/4 of the way open.
Then install the side burner body back with
the three loosened screws. Connect the
ignition wire and put the burner heads on.
Fine tune the air shutter after lighting the
side burner to get a better flame. (Fig. 75)
3. Infrared Burner Conversion
a. Remove the nozzle cover and the nozzle
plate. (Fig. 76)
b. Remove the LP orifice first with the nozzle
removal tool (B), then install the NG orifice.
This nozzle is in the #0404349 hardware
pack and sized 1.38. (Fig. 77)
c. Adjust the infrared burner air shutter to
have a 3/4 in. opening. Then install the
nozzle plate and air shutter cover back.
(Fig. 78)
75
Air shutter adjustment
76
Nozzle plate
77
Sear top orifice
78
Air shutter
Lowes.com/masterforge
28
Nozzle
cover
Gas line
21