Master Forge 0050772 Manual De Instrucciones página 13

CONVERSION INSTRUCTIONS
Rear Burner Conversion
1. Remove the 5 screws (3/16-24 x 1/2 in.) at
the back of burner box to detach the rear
burner cover from the rear panel of burner
box.
During this process, hold the rear
burner cover, otherwise, it will drop and
may break, possibly causing injury.
(Fig. 31)
2. Use a wrench to remove rear burner orifice
(1.03) from the rear burner and the hose.
(Fig. 32)
3. Replace it with the NG orifice, and then
tighten.
Make sure you are using the correct
orifice, marked "1.4". (Fig. 33)
31
rear burner cover
32
hose
1.03
33
1.4
Lowes.com/masterforge
13
rear burner
rear burner