Master Forge 0050772 Manual De Instrucciones página 24

CONVERSION INSTRUCTIONS
f. Use a wrench to remove the orifice from
the side burner hose.
Remove the orifice nut and replace the
orifice with the NG orifice. Then, tighten the
nut. (Fig. 63)
During this process, hold the panel
component, otherwise, it may drop to
cause injury.
Make sure you are using the correct
orifice, marked "1.37".
4. Rear Burner Conversion
a. Remove the 5 screws (3/16-24 x 1/2 in.) at
the back of burner box to detach the rear
burner cover from the rear panel of burner
box.
During this process, hold the rear
burner cover, otherwise, it will drop and
may break, possibly causing injury.
(Fig. 64)
b. Use wrench to remove the rear burner
orifice from the rear burner and the hose.
Replace it with the NG orifice, and then
tighten.
Make sure you are using the correct
orifice, marked "1.4". (Fig. 65)
63
1.37
hose
64
Rear burner cover
65
rear burner
Lowes.com/masterforge
24
orifice nut
1.4 hose