Tabla de contenido
9. Apply pipe tape (not included) to all threaded
connections, and a 2-step PVC glue system (not
included) to non-threaded connections.
10. Place the basin lid (E)/trap assembly from step 7 on
top of the basin (B), making sure the foam gasket (H) is
firmly in place. Screw in the 8 bolts removed in step 3.
11. Pull excess power cord through the cord seal (F)
opening and reinstall the cord seal (F). Make sure the
o-ring is seated in the seal before reinstallation.
9
10
H
11
Cord
Seal
Opening
10
E
Trap
Assembly
F
B
Tabla de contenido
