Tabla de contenido
FOR USERS IN UK, EIRE, MALTA AND CYPRUS ONLY.
If your sewing machine is fitted with a 3 pin non-rewireable BS plug then please read the following.
IMPORTANT (in the United Kingdom)
Main supply (AC 230/240V~, 50Hz)
DO NOT cut off the mains plug from equipment. If the
plug fitted is not suitable for the power point in your
home or the cable is too short to reach a power point,
then obtain an appropriate safety approved exten-
sion lead or consult your dealer.
BE SURE to replace the fuse only with an identical
approved type, as originally fitted and to replace the
fuse cover.
If none the less the mains plug is cut off ensure to
remove the fuse and dispose of the plug immedi-
ately, to avoid a possible shock hazard by inadvert-
ent connection to the main supply.
IMPORTANT (in the other countries)
If the available socket outlet is not suitable for the
plug supplied with this equipment, it should be cut off
and an appropriate three pin plug fitted. With alterna-
tive plugs an approved fuse must be fitted in the plug.
NOTE: The plug severed from the main leads must
be destroyed as a plug with bared flexible cords is
hazardous if engaged in a live socket outlet. In the
event of replacing the plug fuse, use a fuse approved
by ASTA to BS 1362, i.e. carrying the
rating as marked on plug.
Connecting Plugs and Main Power / Sewing Light Switch
( Model PS-2500, PS-2400, PS-2300 STAR140E, STAR130E, STAR120E )
Always replace the fuse cover. Never use plugs with
the fuse cover removed.
WARNING: DO NOT CONNECT EITHER WIRE TO
THE EARTH TERMINAL WHICH IS MARKED WITH
THE LETTER 'E', BY THE EARTH SYMBOL
OR COLOURED GREEN OR YELLOW.
The wires in these main leads are coloured in ac-
cordance with the following code:
As the colours of the wiring in the mains lead of this
appliance may not correspond with the coloured
markings identifying the terminals in your plug, pro-
ceed as follows:
The wire which is coloured blue must be connected
to the terminal which is marked with the letter 'N' or
coloured black or blue.
The wire which is coloured brown must be connected
to the terminal which is marked with the letter 'L' or
coloured red or brown.
mark,
ASA
Blue
Neutral
Brown
Live
2
1
Tabla de contenido
