Kohler K-1997 Guía De Instalación Y Cuidado página 8

4. Secure the Sink
IMPORTANT! The sink must be supported by the hanger bracket.
NOTICE: Risk of product damage. Vitreous material can crack or
chip. Do not overtighten the lag bolts.
If you have not done so already, remove the sink at this time.
Drill holes for the lag bolts at the marked sink anchor hole
locations.
With assistance, carefully lift the sink into place on the hanger
bracket and level the sink.
Install the faucet and drain to the sink according to the
manufacturer's instructions.
Connect and tighten the trap to the drain. Complete the water
supply connections to the faucet according to the instructions
packed with the faucet.
If installing with a shroud:
Do not secure the sink at this time. Proceed to the next section.
If installing a sink only:
Secure the sink to the wall with the lag bolts and washers.
Tighten until snug. Do not overtighten!
1208746-2-A
Washer
Lag Bolt
8 Kohler Co.