Tools And Materials; Before You Begin - Kohler K-1997 Guía De Instalación Y Cuidado

Tools and Materials

Plus:/Plus:/Más:
• (4) 5/16" Lag Bolts and Washers (Not Provided)
• (3) 1/4" Lag Bolts (Not Provided)
• 2x8 Board
Level
Square

Before You Begin

IMPORTANT! Study the ADA/TAS, and Roughing-In information
carefully before installing this product; some dimensions are
installation specific.
NOTE: If you are not installing a shroud with your sink, skip the
steps that relate to the shroud installation.
Observe all local plumbing and building codes.
Prior to installation, unpack the new sink and inspect it for
damage. Return the sink to its protective carton until you are
ready to install it.
These instructions are for installing the sink to wood frame
construction. For other installations, supply suitable bracing and
fastening devices of sufficient size and strength.
Ensure the walls and the floor are square, plumb, and level before
proceeding with the installation.
Fixture dimensions are nominal and conform to tolerances in
ASME A112.19.2/CSA B45.1.
1208746-2-A
Socket Wrench
Screwdriver
With Sockets
2
Offset
Screwdriver
Kohler Co.