Wall Control Operation; Testing Your Fan - Craftmade Inspo INS54 Guia De Instalacion

10. Wall Control Operation.

- turns fan to LOW speed
- turns fan to MEDIUM speed
- turns fan to MEDIUM-HIGH speed
- turns fan to HIGH speed
- turns fan OFF

11. Testing Your Fan.

It is recommended that you test fan before
finalizing installation. Restore power from
circuit box. Test fan speeds with wall control.
Start at the OFF position (no blade
movement) and try each of the 4 different fan
speeds.
If fan does not function properly, please refer
to "Troubleshooting" section to solve any
issues before contacting Customer Service.
Turn fan completely off before moving the
reverse switch. Set reverse switch to
recirculate air depending on the season:
- LEFT position in summer (diagram 1)
- RIGHT position in winter (diagram 2)
A ceiling fan will allow you to raise your
thermostat setting in summer and lower your
thermostat setting in winter without feeling a
difference in your comfort.
Important: Reverse switch must be set either
completely to the LEFT or completely to the
RIGHT for fan to function. If the reverse switch
is set in the middle position (diagram 3), fan
will not operate.
motor
housing
diagram 1
page 9
reverse switch
diagram 2 diagram 3