9. Wall Control Operation.
ON/OFF slider switch - turns wall control ON or OFF
HI button - turns the 2 smaller fans to HIGH speed
MED button - turns the 2 smaller fans to MEDIUM speed
LOW button - turns the 2 smaller fans to LOW speed
FAN OFF button - turns the 2 smaller fans OFF
button - turns main fan ON/OFF when pressed
once (i.e., controls ROTATION of the ENTIRE fan)
10. Remote Control Operation.
HI button - turns the 2 smaller fans to HIGH speed
MED button - turns the 2 smaller fans to MEDIUM speed
LOW button - turns the 2 smaller fans to LOW speed
OFF button - turns the 2 smaller fans OFF
button - turns main fan ON/OFF when pressed
once (i.e., controls ROTATION of the ENTIRE fan)
11. Testing Your Fan.
It is recommended that you test fan before finalizing
installation. Restore power from circuit box and light
switch (if applicable). Locate ON/OFF slider switch on
wall control and set to the ON position. Test
ROTATION/OFF function of main fan with button used to
control rotation of fan; test fan speeds of smaller fans
with different fan speed buttons and OFF button. Next,
locate remote control. Test fan speeds (and OFF) with
the different fan speed buttons and then test rotation of
fan (and OFF) as was done with wall control. If the
wall/remote control operates all of the functions of the
fan, battery has been installed correctly. If the wall
and/or remote controls do (does) not operate all of the
fan functions, refer to "Troubleshooting" section to solve
any issues before contacting Customer Service.
NOTE: If remote control interferes with other appliances,
change code switches on remote control transmitter
and wall control to another code. If you do change the
code, turn power off first and then remove battery
cover. After setting new code on transmitter AND wall
control, go back to instructions in last paragraph of
Section 8 (page 6).
The tilt angle of the smaller fans may be adjusted up or
down by simply moving them gently up or down.
CAUTION: To avoid personal injury or damage to the
fan(s), both the main fan and the smaller fans MUST BE
OFF before adjusting the smaller fans up or down.
smaller fan
page 7
main fan
smaller fan