Function Selection; Auxiliary Functions; Child Lock - Ansonic LAT-56 Manual Del Usuario

EN

Function Selection

Depending on the selected program, the
selectable auxiliary functions are selected
by pressing the each function's button.
The light of the selected function comes

Auxiliary Functions

Rinse Hold
If you do not want to unload your clothes
immediately after the cotton, synthetics,
woolen and delicate fabrics program, you
may release your clothes inside the machine
in the last rinsing water by pressing the rinse
hold button in order to prevent your clothes
become wrinkled. Meanwhile, "Start/Pause/
Cancel" light will flash. After this process you
may end the program by pressing "Start/
Pause/Cancel" button. This feature should
not be confused with the "water cut off" or
"door could not be locked" cases that can
be seen at the beginning of the program.
This auxiliary function is activated at the
rinsing step just before the final spinning step
of the program.

Child Lock

"This machine is equipped with a child lock
in order to prevent the program flow to be
affected when the buttons are pressed
during washing cycles. In order to enable
the child lock, press and keep pressed the
1st and 2nd auxiliary function buttons from
the left at the same time for 3 seconds.
The light of the 1st auxiliary function button
will flash continuously.
After the program completes, it is
necessary to disable the child lock in order
Program Flow
When the "Start/Pause/Cancel" button
is pressed after the washing program is
selected, door led goes out and "Start/
Pause/Cancel" light comes on. "Start/
Pause/Cancel" light remains on during the
program and goes off after the program
ends.
You can put your machine into "Pause"
mode by pressing the "Start/Pause/Can-
cel" button when it is operating. In this
on. Since it is not possible to select some
of the auxiliary functions together, one of
them becomes off when the other one is
selected.
Rinse Plus
You can increase the number of the
current rinsing cycles by using this
function. Thus, the risk of the sensitive
skins get effected by the detergent
remaining on the laundry is reduced.
Spin Speed selection button
When you want to reduce the spin speed to
500 rpm, press this button.
to initiate a new program or interfere the
program. Therefore, when the same
buttons are pressed for 3 seconds, light of
the second auxiliary function will go off.
case, "Start/Pause/Cancel" light will flash.
Some alterations in program settings
may be made in the "Pause" mode (See,
Changing a Program) and if "Pause" mode
is entered in an appropriate step of the
program, adding laundry function may be
used (See, Laundry adding feature).
In order to return to the "Washing" mode
from the "Pause" mode, you need to press
12