Washing A Load Of Laundry; Loading Your Washer; Getting Started - Samsung WF231 Serie Manual Del Usuario

Ocultar thumbs Ver también para WF231 Serie:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

washing a load of laundry

LOADING YOUR WASHER

You can fi ll the tub with dry, unfolded clothes, but DO NOT OVERLOAD the tub.
Overloading may reduce washing effi ciency, cause excess wear, and possibly cause creasing or
wrinkling of the load.
Wash delicate items such as bras, hosiery, and other lingerie in the Delicates cycle with similar
lightweight items.
When washing big bulky items or a few smaller items that don't fi ll the tub completely – a rug, a pillow, stuffed
toys, or one or two sweaters, for example – add a few towels to improve tumbling and spin performance.
During the spin cycle, the washer may add additional water to redistribute any excess unbalance
inside the drum.
When washing heavily soiled loads, not overloading your Washer is very important to assure good
cleaning results.
To add a forgotten item:
1. Press the Power button.
2. Press the Start/Pause Button.
3. Wait for the Door Lock light to go out (5 seconds).
4. Add the item, close the door, and press the Start/Pause Button.
After a 10-second pause, the cycle resumes.
To ensure thorough cleaning, add items within fi ve minutes of starting the wash cycle.

GETTING STARTED

1. Load your Washer.
2. Close the door.
3. Press the Power button.
4. Add detergent and additives to the dispenser (see pages 20~21).
5. Select the appropriate cycle and options for the load (see pages 18~19).
6. Press the Start/Pause Button.
7. The Wash Indicator light illuminates.
8. The estimated cycle time appears in the display.
The time may fl uctuate to better indicate the time remaining in the cycle.
The actual time required for a cycle may differ from the estimated time in the display depending on the
water pressure, water temperature, detergent, and laundry.
9. Before your washer starts to fi ll, it will make a series of clicking noises to check the door lock and do a
quick drain.
When the cycle is complete, the Door Lock light goes out and "End" appears in the display.
DO NOT attempt to open the door until the Door Lock light is off. To add a forgotten item, see
"Loading your Washer" section. (page 19)
When your Washer is restarted after a pause, expect a delay of up to 15 seconds before the cycle
continues.
Pressing Power cancels the cycle and stops your washer.
The Wash, Rinse and Spin indicator lights illuminate during those portions of the cycle.
Do not place anything on top of your washer while it is running.
WARNING
18_ washing a load of laundry
WF231ANW-02832D_EN.indd Sec3:18
WF231ANW-02832D_EN.indd Sec3:18
2011-04-18
2011-04-18
10:38:19
10:38:19

Capítulos

Tabla de contenido
loading

Tabla de contenido