Prepare The Site - Kohler Purist K-T14428 Guia De Instalacion

2-1/2" ( . cm)
1/ " ( mm)
2-1/8" ( . cm)
AX.
1- /1 " .
(3.3cm)
8" (20.3cm)
A A

1. Prepare the Site

Install or relocate the water supplies as needed.
Protect the surfaces of the bath/deck during installation.
The diameter of the spout hole in the deck is 1" (2.5cm). The diameter of
the valve hole in the deck is 1–1/2" (3.8cm). Ensure that holes drilled into
the deck are not oversized. The spout and valves require adequate base
material strength and maximum contact area with the deck.
Plaster guard diameters are approximately 1–5/8" (4.1cm) for the valves
and 13/16" (2.1cm) for the spout.
NOTE: Reinforcing material may be required if the deck or rim is thin.
Install before proceeding.
NOTE: For installations to be covered with tile, the tile thickness must not
exceed 1–1/4" (3.2cm).
Kohler Co.
11-3/8"
(28.9cm)
1/ " ( mm)
1-1/ "
(3.2cm) AX.
-3/ "
(19. cm)
2-1/8" ( . cm)
3-1/2" (8.9cm)
3/ "
.
. .
A A
2-1/2" . ( . cm) 2-1/2" . ( . cm)
3
-1/2"
(19.1cm)
/8" .
(2.2cm)
AX.
2- /8" 1-3/8"
( . cm) (3. cm)
-3/ " -3/ "
(12.1cm) (12.1cm)
1016271-2-A