Bosch 1 687 001 504 Instrucciones Para La Instalación página 8

en 8 | 1 687 001 504 | Installation BEA 050
3. Installation BEA 050
3.1 Fitting receptacle
1. Disconnect the BEA from the power supply.
2. Remove the housing cover.
3. Remove the long cover panel.
4. Attach the short cover panel (NO
5. Attach the receptacle for the NO sensor.
|
1 689 978 394 2016-08-08
3.2
1. Guide the connecting cable from the rear through
2. Open the container of the NO sensor and screw the
).
2
3. Connect the connecting cable to the NO sensor.
NO-Sensor anschließen
the opening and slide the rubberized sheath into the
recess in the panel.
NO sensor into the receptacle.
Robert Bosch GmbH