Maintenance; Customer Responsibilities - Craftsman 919.157260 Manual Del Usuario

Customer Responsibilities

Check Safety Valve
Drain Tank
Oil Leaks
Check Pump Oil
Change Pump Oil
Unusual Noise and/or Vibration
Air Filter
Drive Belt -Condition
Motor Pulley/Flywheel alignment
Air compressor pump intake
and exhaust valves
1- more frequent in dusty or humid conditions
Consult the Engine Owners Manual for the man u fac tur er's recommendations
for any and all engine maintenance.
doing any maintenance or repair, disconnect the spark plug wire to prevent
accidental starting, and relieve air tank pressure. Never operate the
compressor with the belt guard removed.
To ensure effi cient operation and longer life of the air compressor outfi t, a
routine maintenance schedule should be prepared and followed. The following
routine maintenance schedule is geared to an outfi t in a normal working
environment operating on a daily basis. If necessary, the schedule should
be modifi ed to suit the conditions under which your compressor is used.
The modifi cations will depend upon the hours of operation and the working
environment. Compressor units in an extremely dirty and/or hostile environment
will require a greater frequency of all maintenance checks.
NOTE: See "Operation"section for the location of controls.
To Check Safety Valve
properly, over-pressurization may
occur, causing air tank rupture or
an explosion.

MAINTENANCE

Before
each
use
During maintenance, you could be exposed to compressed
air or moving parts. Personal injuries can occur. Before
If the safety valve
does not work
Daily
Every
or after
8
each
hours
use
●
●
●
●
●
1. Before starting compressor, pull
the ring on the safety valve to
make sure that the safety valve
operates freely. If the valve
is stuck or does not operate
smoothly, it must be replaced
with the same type of valve.
17 - ENG
Every Every Every
40 100 160
hours hours hours
●
● 1
●
●
Yearly
●
A13567