Bahco BCL40IB Manual Del Usuario página 16

4
Use tweezers
to remove
the remaining
tying wire.
Never pull out the wire at the reel end.
Always pull it out at the hook in the direction of feed.
7
Place a new coil on the reel.
Max. wire ø 0.43 mm.
Use only the following BAHCO binding materials:
- BCL4001 paper-coated wire
- BCL4002 plastic-coated wire
10
Insert one end of the wire -
which must be smooth - into the
machine until there is resistance.
11
Turn on the power for a test
run. Make one tie and remove
it with tweezers.
Insert the
5
guiding plate.
8
Replace the cover
of the reel.
The coil
on the reel
must turn
clockwise.
12
6
Replace the
front cover.
9
Remove the strap on the coil
with tweezers or scissors.
The wire must
be smooth
and untwisted.
Close the cover
of the coil holder.