INTRODUCTION
THANK YOU
Thank you for buying this quality product. This modern
outdoor power tool will provide many hours of useful
service. You will find it to be a great labor-saving device.
This operator's manual provides you with easy-to-
understand operating instructions. Read the whole
manual and follow all the instructions to keep your new
outdoor power tool in top operating condition.
PRODUCT REFERENCES, ILLUSTRATIONS AND
SPECIFICATIONS
All information, illustrations and specifications in this
manual are based on the latest product information
available at the time of printing. We reserve the right to
make changes at any time without notice.
©
Copyright
2000 Ryobi Outdoor Products, Inc.
All Rights Reserved.
®
Click-Link
is a registered trademark of Ryobi Outdoor
Products.
Bump-Head™ is a trademark of Ryobi Outdoor
Products.
SplitLine™ is a trademark of Ryobi Outdoor Products.
SERVICE INFORMATION
Service on this unit both within and after the warranty
period should be performed only by an authorized and
approved service dealer.
Dial:
• 1-800-345-8746 or www.ryobi.com on the world wide
web for authorized service dealers in the United States
Or
• 1-800-668-1238 in Canada to obtain the listing of the
authorized service dealer nearest you.
DO NOT RETURN THE UNIT TO THE RETAILER.
NOTE: PROOF OF PURCHASE WILL BE REQUIRED
FOR WARRANTY SERVICE.
Make sure this manual is carefully read and understood
before starting or operating this equipment.
THIS PRODUCT IS COVERED BY ONE OR MORE
US PATENTS, OTHER PATENTS PENDING.
A complete parts list can be viewed and printed
by going to our web site, www.ryobi.com. Or,
you can request a copy by calling 1-800-345-TRIM
(1-800-345-8746). Please have the unit model and
serial number when calling.
2
TABLE OF CONTENTS
I.
A. Important Safety Information . . . . . . . . . . . . . . . 4-5
C. Know Your Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
III. Assembly Instructions . . . . . . . . . . . . . . . . . . . . . . . . 8
A. Installing and Adjusting the D handle . . . . . . . . . . 8
B. Installing the Cutting Attachment Shield . . . . . . . . 8
C. Installing a Prewound Reel . . . . . . . . . . . . . . . . . 15
H. Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
I. Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
VIII. Troubleshooting Chart . . . . . . . . . . . . . . . . . . . . . . . 19
X. Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
CONTENTS OF CARTON
• Model 720r Trimmer with
Bump Head Cutting Attachment
∆ D-Handle and Hardware
∆ Cutting Attachment Shield with Hardware
• Operator's Manual
• Product Registration Card
• Bottle of 2-Cycle Oil
∆ This item will either be installed on the unit or in the
hardware pack