Trevi DS 1976 V Guia Del Usuario página 11

POWER
The supplied power adapter works with voltage 100-240V ~ 60 / 50Hz.
Insert the plug into the socket for DC power (15) and the plug into a power outlet.
Note: Use only the supplied power adapter, several devices may have polarities and/or different
voltages.
Unless otherwise specified, the command descriptions are for the remote control.
ON/OFF
1. Set the main switch (16) to "I" to turn on the device.
2. Set the main switch (16) to "0" to turn off the device completely.
STAND-BY FUNCTION
Once the main switch to "I" position, the unit will go into standby mode (display lit with indication
time).
1. Press the button
2. Premere nuovamente il tasto
Notes:
- To turn on/off the unit using the knob on the unit (ON/OFF knob, VOL, BASS/TREBLE (12))
press it for about two seconds.
- The stand-by function is activated only if the main switch (16) is in "I" position.
VOLUME ADJUSTMENT
Turn the volume knob VOL(12) on the unit to increase or decrease the overall volume of playback
or press the VOL+(30) or VOL-(27) on the remote control to increase or decrease the volume.
MUTE FUNCTION
You can also press the MUTE(36) button on the remote control to turn off the sound temporarily
(the volume level will flash on display); press the MUTE button again to cancel the mute function
and restore the sound.
SOURCE BUTTON
Press the FUNC(37) button repeatedly to switch among BLUETOOTH/RADIO FM/USB/AUX-IN modes.
BLUETOOTH OPERATION
Prior to use Bluetooth function, your system should be paired firstly with your Bluetooth device
("Pairing" means establish connection between Bluetooth device such as mobile phone, Tablet,
PC, etc...)
1. First press FUNC(37) button until you see the display of "BT"; the unit will go into research for
connection with other devices BT (marked "BT" on the display will flash).
2. Enable the Bluetooth® connection on the external device (phone, tablet, etc...) with reference
to its Operating Manual.
3. From the external device search of devices and select "DS 1976 V"; if required, type the code
"0000".
4. When the connection with the external device will be the case, the "BT" on the display will
remain on steadily.
(17) to turn the unit.
(17) to restore in standby mode.