Grill & Blade Removal - Vornado ENERGY SMART 693DC Guia Del Propietario

GRILL & BLADE REMOVAL
WARNING: To reduce the risk of electrical shock and injury to persons, unplug the circulator before removing grill.
GRILL REMOVAL
1. Release the front grill clips located at the 10, 6 and 2 o'clock positions.
Press the Front Grill Clip downward to release.
A flat head screw driver may be used if front grill clips are difficult
to release.
2. Dust or wash Grill with a mild dishwashing soap.
3. To reattach - align the front grill clips with the holes and firmly snap
each clip back into place.
BLADE REMOVAL
1. First, remove the blade by pulling the blade straight out from the shaft.
2. Dust or wash Blade with a mild dishwashing soap.
3. To reattach - be certain the flat side of the shaft aligns directly with the
corresponding flat side on the blade's socket. Push the blade all the
way on the shaft until it bottoms out. Do not use a hammer as this
could result in bearing damage.
Note: Do not place grill or blade in dishwasher. The excessive heat can
distort the plastic.
Clip
Clip
Clip
English
7