Reporting Defects Or Anomalies; Request For Parts; General Safety Standards And Accident Prevention; Symbols On The Machines - Berkel BV 400/25 Manual De Uso Y Mantenimento

Instruction manual for vacuum chamber packaging machines Mod. BV 400/25 - BV 600/60 Instruction manual for vacuum chamber packaging machines Mod. BV 400/25 – BV 400/25H – BV 600/60
Rev. 01 - 04/2019 - Cod. 1500656 - Instruction manual for vacuum chamber packaging machines Mod. C46-C46H-C62

1.6 rEPorTINg dEfECTS or aNoMalIES

Please report any defects or anomalies that go beyond the contents of this manual to the dealer in your area
or directly to the manufacturer, who will gladly help resolve the problem.
Have the following readily available:
• Name of model
• Serial number

1.7 rEquEST for ParTS

Please request spare parts from the dealer in your area or directly from the manufacturer, specifying:
• Name of model
• Serial number
• Part code

2. gENEral SafETy STaNdardS aNd aCCIdENT PrEvENTIoN

The manufacturer has analysed the basic operations regarding use and maintenance while designing and
creating the appliance. The methods of intervention have been studied and included in this manual for them to
be performed safely. Failure to comply with these Standards can be extremely hazardous for the safety of the
appliance as well as that of the personnel.
The manufacturer declines all liability for damage caused to persons, objects or animals deriving from non-
compliance with the requirements stipulated in this manual, safety warnings, alterations to the appliance without
prior authorisation, tampering with and non-original spare parts being used.
2.1 SyMBOlS ON The MaChINeS
Symbols and warnings are found on the machines, which are an integral part of the safety devices of the ma-
chine and highlight potentially hazardous situations for the safety of the appliance and/or the operator.
Risk of electric shock; electrical hazard.
5
MaX 1×10 Pa (1 bar)
GAS
Only use gas mixtures of carbon dioxide and nitrogen, or carbon dioxide, or nitrogen.
N , CO , N +CO
2 2 2 2
Mixtures containing oxygen or other flammable or explosive gases are prohibited.
GAS MAX 1 ATM
DISCONNECT THE POWER PLUG
BEFORE REMOVING THE PANEL
(OR OPENING THE MACHINE)
8
Gas and compressed air connections for additional sealing pressure:
maximum pressure 1x10
Maintenance: disconnect the power plug before removing the rear panel
of the machine.
Maintenance: regularly check the oil level of the vacuum pump.
Pa (1 bar).
5