Features And Controls; Know Your Pressure Washer - Craftsman 580.752610 Instrucciones De Uso

Ocultar thumbs Ver también para 580.752610:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

KNOW YOUR PRESSURE WASHER

Read the Operator's Manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
A
B
C
D
E
F
G
H
A - Spray Gun — Controls the application of water onto cleaning
surface with trigger device. Includes trigger lock.
B - Spray Tips — Detergent, 0°, 15° and 40°: for various high
pressure cleaning applications.
C - Accessory Tray — Provides convenient storage for accessories,
such as gun, spray tips, etc.
D - Project Pro® PerfectMix™ Siphon — Mixes concentrate with
pressure washer spray.
E - Bottle Bracket — Cleaning solution bottle fits in wire form
bracket here. Concentrate bottle not included.
F - Oil Fill/Dipstick — Check, add and drain engine oil here.
G - Automatic Cool Down System — Cycles water through pump
when water reaches 125°-155°F. Warm water will discharge from
pump onto ground. This system prevents internal pump damage.
H - Pump — Develops high pressure.
J - Detergent Siphoning Tube/Filter — Use to siphon pressure washer
safe detergents into the low pressure stream.
K - High Pressure Outlet — Connection for high pressure hose.
L - Water Inlet — Connection for garden hose.
M - Air Filter — Protects engine by filtering dust and debris out of
intake air.

FEATURES AND CONTROLS

N - Recoil Starter — Used for starting the engine manually.
P - Fuel Tank — Fill tank with regular unleaded fuel. Always leave
R - Fold Down Handle — Handle and accessory tray fold flat atop
S - Spray Tip Extension with Quick Connect — Allows you to
T - Hose Wrap and High Pressure Hose — Hose wrap provides
Items Not Shown:
Fuel Valve — Used to turn fuel supply on and off to engine.
Engine Switch — Sets engine in starting mode for recoil starter and
stops a running engine.
Choke Rod — Prepares a cold engine for starting.
Identification Label (near rear of base plate) — Provides model
and serial number of pressure washer. Please have these readily
available if calling for assistance.
Warning/Operating Instructions Tag — Identifies hazards and proper
procedure to start/stop pressure washer.
6
room for fuel expansion.
cold engine for space-saving storage.
switch between four different spray tips.
easy transport and handling of the high pressure hose. Connect
one end of hose to water pump and the other end to spray gun.
T
S
R
P
N
M
K
L
,
J

Capítulos

Tabla de contenido
loading

Tabla de contenido