Tabla de contenido
Idiomas disponibles
Idiomas disponibles
HOW TO U S E
This product is for household use only.
G E T T I NG STARTE D
• Remove all packing material, any stickers, and the plastic band around
the power plug.
• Remove and save literature.
• Please visit www.prodprotect.com/blackanddecker to register your
warranty.
• Wash all removable parts as instructed in CARE AND CLEANING
section of this manual.
U S IN G YO U R BLE N D E R
Important: Appliance should always have lid in place when in use.
Caution: Do not place blender jar onto base when motor is running.
1. Uncoil power cord from under the base
2. Place motor base on a flat stable surface
3. Place one-piece jar on motor base
4. Make sure blender is OFF and place ingredients to be blended into jar. For
best results and the most efficient blend, place ingredients in the jar in
the following order:
a. Liquids
b. Powders
c. Soft foods
d. Hard foods
e. Ice cubes last
Tip: When using frozen fruits it is not necessary to also add ice.
5. Place the lid on the jar, making sure the lid cap is closed.
6. Plug power cord into outlet. Press ON/OFF button. LED should turn a
solid color to signify the blender is in standby mode. After 2 minutes the
unit will automatically power off if no buttons are pressed.
Note: When in use, do not leave blender unattended. When using hard foods,
such as ice or cheese, keep one hand on the lid to keep blender in place.
7. Select the speed that best suits your desired task. (See SPEED CHART)
Important: Do not hold speed button. Simply press the desired speed,
watch, and press ON/OFF when the desired consistency is achieved.
Holding the button for longer than 30 seconds will cause the blender to shut
off. Unit must be shut off to reset.
8. When blending thick mixtures, such as smoothies and milkshakes, use
the PULSE/Ice Crush button for several seconds, then release. Repeat to
mix ingredients and then run continuously until food has reached desired
4
Tabla de contenido
