Tabla de contenido
Idiomas disponibles
Idiomas disponibles
HOW TO U SE
This product is for household use only.
G ET TI NG STARTE D
• Remove all packing material, any stickers from the product, and the plastic
band around the plug.
• Remove and save literature.
• Please visit www.prodprotect.com/blackanddecker to register your warranty.
• Wash all removable parts as instructed in CARE AND CLEANING
section of this manual.
BLENDER JAR ASSEMBLY
1. Turn blending jar upside down and place flat on
counter top or work surface.
2. Place the blade assembly in bottom opening of the jar
with blades down. (A)
Caution: Blades are sharp. Handle carefully.
3. Place jar base onto jar and rotate clockwise until it is tight.
4. Turn assembled jar right side up.
5. Place lid with lid cap in place on blending jar.
6. Unwrap power cord from storage area under the base.
7. Place jar assembly on base. (B).
8. Blender is now ready for use.
USING YOUR BLENDER
Important: Appliance should always have lid in place when in use.
Caution: Do not place blender jar onto base when motor is running.
1. Make sure appliance is OFF.
2. Place foods to be blended into jar. For best results place ingredients in jar
in the following order: liquids, powders, soft foods, hard foods, ice.
3. Place lid securely on jar; make sure lid cap is in place.
4. Plug power cord into outlet.
Note: When in use, do not leave blender unattended. When using hard foods,
such as ice or cheese, keep one hand on the lid to keep blender in place.
5. Select the speed or function that best suits your desired task. (See SPEED
AND FUNCTION CHART)
6. You may remove the lid cap and drop ingredients through the lid cap
opening while the blender is running. (C)
Important: Do not remove the lid while the blender is running.
7. Make sure blades have completely stopped before attempting to remove
the blending jar from the base.
8. To remove the jar, grasp the handle and lift up.
9. Remove lid to serve.
Note: Unplug the appliance when not in use.
C C
5
Tabla de contenido
