Care And Cleaning; Service And Customer Care - Kenwood FS620 Serie Manual De Instrucciones

All manuals and user guides at all-guides.com
Stir large amounts half way through
●
cooking.
Smaller amounts cook faster than
●
larger amounts.
Similar-sized pieces of food cook
●
evenly.
Like a conventional oven, you can
●
add food as you go along. If
something needs less time, add it
later.
If you lift the lid, steam will escape
●
and cooking will take longer.
Food will keep cooking when your
●
steamer switches off, so remove it
immediately.
The cooking times on pages 5 - 6
●
are guides based on using the lower
basket. The higher the food is, the
slower it cooks. So allow an extra
5 - 10 minutes for food in the next
basket above. Check that food is
thoroughly cooked before eating.
If your food's not cooked enough,
●
reset the time. You may need to top
up with water.

care and cleaning

Before cleaning, always switch off,
●
unplug and let everything cool.
Never put your steamer base in
●
water or let the cord or plug get wet.
cleaning the base
Wipe with a damp cloth, then dry.
●
all other parts
Wash in warm soapy water, then dry.
●
For storage, stack the baskets one
●
inside the other, starting with the
highest numbered basket and
finishing with basket number 1
descaling
The appliance should be de-scaled
●
once a month or after every 30 uses
depending upon which comes first.
1 Fit the water tank and fill with 200ml
of household appliance descaler,
then fill the water tank up to the
MAX level with water (approximately
800ml).
2 Fit the drip tray, one basket and the
lid.
3 Plug in the appliance, switch on and
allow the steamer to operate for 5
minutes.
4 Switch off and unplug the appliance
and allow to stand overnight.
5 Empty and discard the descaling
liquid.
6 Wash the removable water tank, drip
tray, basket and lid in warm soapy
water, then dry.
7 Refill the water tank with fresh water,
refit the parts and allow to run for 5
minutes. Empty and discard any
remaining water.
8 Wash the water tank, drip tray,
basket and lid in warm soapy water.
9 The appliance is now ready for use.
service and customer
care
If the cord is damaged it must, for
●
safety reasons, be replaced by
Kenwood or an authorised Kenwood
repairer.
If you need help with:
using your steamer
●
servicing or repairs
●
Contact the shop where you bought
your steamer.
.
4