Tips And Tricks; U.c.a.s 600 Accessories - HK Audio Lucas 600 Manual Del Usuario

L.U.C.A.S 600 Manual 1.0
HK AUDIO ® Speaker Stand Add On Package
HK AUDIO ® Protective Covers for L.U.C.A.S 600
HK AUDIO ® L.U.C.A.S 600 Wall Mount
L.U.C.A.S 600 Satellites
1 Input
Connecting the cables: Connect the satellite speakers'
Speakon ® inputs to the L.U.C.A.S 600 system's Left
and Right outputs using cables equipped with
®
Speakon connectors.
Note: Be sure to rotate the Speakon
clockwise until they lock in place! You must first
disengage the safety catch before you can unplug
the connector. To do this, pull the bayonet catch
towards the cable.
2 Attaching the Wall Mount
On the back of the housing you'll find two recessed
M5 threads designed to accept the optional wall mount.

4 Tips and Tricks

1 Always clamp the power cable into the tab that is
designed to hold it in place. It is located on the
rear panel of the electronics chassis. This prevents
the mains power cable from being pulled out
inadvertently.
2 Don't expose electronic circuitry to moisture!
When you set the system up outdoors, be sure to
protect it against rain. Keep soft drinks, beer or
any other liquids well away from the cabinets to
protect their electronic components from short
circuits.
3 To ensure proper ventilation, make sure the
subwoofer is placed a sufficient distance away
from walls and isn't covered by curtains or similar
materials. This is crucial to prevent the power
amps from overheating.
4.Ensure that the ventilation ducts on the subwoofer's
rear panel always remain free of dirt, debris and
other obstructions, and that the fan can rotate
freely. Otherwise, the electronic components may
overheat and suffer damage.
5 L.U.C.A.S 600 delivers optimum sound, so you
should provide it with optimum input signals!
Noise such as humming is generally caused by
defective cables, the wrong type of cables, or
unbalanced signals routed into the mixing console.
Check all signal and mains cables for integrity.
6 Prevent distortion! Not only is it unpleasant to
the ears of your audience, it can also damage
your equipment. Make sure all components that
®
connectors are connected directly and indirectly to the
L.U.C.A.S 600 system have sufficient power
ratings, and that they don't distort because they're
running at their respective limits. Provide an
undistorted signal to the system by adjusting the
output level of the sending device.
7 Avoid ground loops! For example, you may en-
counter a ground loop when the mixer is grounded
via a mains cable which isn't connected to the
same mains circuit as the L.U.C.A.S 600 system.
To prevent this problem, always connect
L.U.C.A.S 600 and the mixing console to the
same electrical circuit (same phase!). If your
equipment hums despite this precaution, the
Ground Lift button can be a great help.
Caution: Never tape over the plug's ground terminal
– this endangers lives!
5. L.U.C.A.S 600 Accessories
HK AUDIO ® Speaker Add-On Package
The complete L.U.C.A.S 600 accessory kit consisting
of two aluminum cabinet tripods, one gig bag and
two speaker cables.
HK AUDIO ® Protective Covers for L.U.C.A.S 600
Comprises one subwoofer cover and two satellite
covers. Extremely tear-resistant, water-repellent and
thickly upholstered, these covers afford lasting
protection for L.U.C.A.S 600 during transport.
HK AUDIO ® L.U.C.A.S 600 Wall Mount
Bracket for mounting L.U.C.A.S 600 satellites on walls.
To learn more about original HK AUDIO
talk to your HK AUDIO
www.hkaudio.com
®
accessories,
® dealer or visit