Ec Declaration Of Conformity - Denios 115212 Manual Del Usuario

Betriebsanleitung
6. Maintenance and servicing
Check screwed joints
-
Check lock and joints of the bin tipper for ease of movement and if necessary grease with commercial
-
grease
Have regular inspections carried out at maximum intervals of one year by an expert from the operators.
-
Have extraordinary inspections carried out after accidents or special incidents that may adversely affect the
-
carrying capacity as well as after servicing by an expert from the operators.
Before the visual and function control under certain circumstances prior cleaning of the bin tipper may be
-
necessary.
The scope of the inspection in case of visual defects and malfunctions extends to breaks, deformation,
-
incipient cracks, damage, wear and tear, corrosion damage and malfunctions of the bin tipper
As evidence that the testing has been carried out the operator must draw up and keep a checklist.
-
In case of visible deformation, obvious damage, major wear and tear of the screws and screw guides the
-
bin tipper must not be used further.
7. Declaration of conformity

EC DECLARATION OF CONFORMITY

In accordance with the
We, DENIOS AG, Dehmer Straße 58-64, 32549 Bad Oeynhausen, hereby declare that the design of our prod-
uct:
Mobile bin tipper 115212
complies with the following relevant regulations:
EC Machinery Directive in the version 98/37/EC
Harmonised standards applied:
EN 294
EN 349
EN 1050
to which our declaration relates.
Bad Oeynhausen, dated 12/09/2008
fahrbarer Mülltonnenkipper
115212
EC Machinery Directive 98/37/EC
...................................................................................
Seite 6 von 10 Seiten
Theodor Breucker
Ausgabe 08/2008