Assemble The Freezer Drawer - Samsung RF266 Manual De Usuario

ASSEMBLE THE FREEZER DRAWER

1. Pull out the rails to the full length on each side of the cabinet evenly.
2. Hang the freezer door front onto open slots on the sides.
Make sure the door is well assembled on the rail
CAUTION
3. Tighten four 10mm hex-head screws completely.
4. With the drawer pulled out fully, insert the lower basket (
the rail system.
If the drawer is not properly assembled on the rail, the door
CAUTION
will not close and it will cause frost.
5. Hook the ends of the tilting pocket (
and push down until they lock into place.
) into
6
) into both brackets ( ),
7 8
Slot
Slot
6
7
8
Setting Up_13