REPA ELETTRONIC Serie Manual De Instrucciones página 9

PROCEDURES FOR MANUAL REGENERATION
TO START MANUAL REGENERATION:
• Press and immediately release the button REGENERATE once for delayed regeneration. The system will regenerate at
the next set time (2:00). A flashing regeneration symbol will appear
• Keep the button REGENERATE pressed for 5 sec to immediately start the manual regeneration.
A regeneration symbol will appear.
• After immediate regeneration starts, press REGENERATE again in order to start the second manual regeneration.
The symbol X2 will appear, informing that the first regeneration will be followed by a second one.
DURING REGENERATION:
• "C" followed by a number shows the current cycle.
• The total remaining time for regeneration is shown on the
display.
• Keep SET pressed to see the remaining time for the current
cycle.
TO SCROLL THE REGENERATION CYCLES:
• Keep SET pressed - it shows the current time;
• Simultaneously press and release SET and UP in order to proceed with the cycle. During the cam operation an hourglass
will appear. When the cam reaches the next cycle, "C2" will appear.
• Press and release SET and UP again in order to proceed with the cycle.
• Keep SET and UP pressed for 5 sec to cancel regeneration. The hourglass will flash when the cancellation has been
completed. The camshaft will proceed towards the initial position - it may take 1-2 minutes.
REGENERATION CYCLES:
C1 Counter-washing
C2 Regenerating agent suction/slow rinse (not used in filter mode)
C3 Slow rinse (not used in filter mode)
C4 System pause (to re-pressurize the bottle)
C5 Fast rinse cycle
C6 II° counter-washing cycle (not used in filter mode)
C7 II° fast rinse cycle (not used in filter mode)
C8 Filling the regenerating tub (not used in filter mode)
.
REGENERATION
SYMBOL
CYCLE
INDICATOR
9