Important - REPA ELETTRONIC Serie Manual De Instrucciones

PHASE 4B:
SET THE SAFETY REGENERATION MODE
(ONLY FOR PROGRAMMERS 760 WITH VOLUMETRIC CONTROL)
warning

IMPORTANT

Legislative Decree 443/90 of the italian law establishes the obligation for automatic regeneration at least once every 4 days.
• If you use 740, move to phase 5.
• Set the number of days for safety regeneration frequency
also without completing the cycle.
• Days "0" is the default value.
• The days can be set starting from 1/2 day (0.5) to 99 days.
• To change, press SET in order to have the value "0" flash.
• Use buttons UP and DOWN to change the number of days.
• Press SET to confirm the regeneration frequency and move to
the next cycle.
PHASE 5:
SET QUANTITY OF SALT
(REGENERATING AGENT QUANTITY)
warning
IMPORTANT
Never change this value. Should this accidentally happen, refer to the related column on the table.
• Set the desired regenerating quantity of salt.
• The default value is "S", medium level.
• 3 levels of salt are available:
L - low level;
S - medium level;
H - high level;
• Choose the most appropriate level according to the water softener model.
• To change salt setting, press SET and use UP and DOWN to select the desired setting.
• Press SET to confirm the setting and move to the next parameter.
SET LOW SALT QUANTITY SET SALT STANDARD QUALITY SET HIGH SALT QUANTITY
7