REPA ELETTRONIC Serie Manual De Instrucciones página 5

SOFTENER START-UP
INTRODUCTION
Every time you enter the different programmes by pressing SET, the display will start flashing.
If you want to change the value of the related phase, press the button UP or DOWN; if you want to move to the next stage,
press SET again.
PHASE 1:
TIME SETTING
• While it flashes "12:00" or "----", set the correct time.
• Use the buttons UP and DOWN to find the correct time.
• Press SET to confirm the correct time and move to the next
parameter
PHASE 2:
SET THE DAY OF THE WEEK
• Press SET to have the arrow under D (Sunday) flashing.
• Use the buttons UP and DOWN to move the arrow under the
correct day of the week.
• Press SET to confirm and move to the next parameter.
AFTER PHASES 1-2, THE TIMER IS OPERATING. MOVE TO PHASE 4 IF YOU NEED FURTHER SETTINGS TO PROGRAMME YOUR
SYSTEM.
To exit the programming function, wait 30 sec and the timer will automatically return to the normal operating mode.
PHASE 3:
CHANGE REGENERATION TIME
• Time: 2:00 is the default time for regeneration.
If this is the desired value, press DOWN to move to phase 5.
• To change the regeneration time, press SET – in this way 2:00
will flash.
• Use UP and DOWN to select the desired regeneration time.
• Press SET to confirm the time and move to the next
parameter.
5