Device elements
1 Pickup for floor nozzle
2 Suction hose
3 Air outlet, working air
4 Suction head
5 Suction head lock
6 Dirt receptacle
7 Steering roller
8 Recessed grip
9 Air inlet, motor cooling air
10 Suction support
11 Socket (Ap Te only)
12 Floor nozzle
13 Suction tube
14 Main switch
15 Button for filter shake off system
16 Carrying handle
17 Fixing eyelet
18 Hose hook
19 Float
20 Bender
21 Cartridge filter (PES)
22 Fastening nut
23 Holder for suction pipe
24 Power cord
25 Nameplate
26 Cable hook
Start up
ATTENTION
For vacuuming, the cartridge filter must al-
ways be installed.
Dry vacuum cleaning
– When vacuuming up fine dust, a fleece
filter bag can be used in addition.
Install fleece filter bag
Illustration
Release and remove the suction head.
Insert the fleece filter bag.
Insert and lock the suction head.
Wet vacuum cleaning
Inserting the rubber lips
Illustration
Remove the brush strips.
Install the rubber lips.
Remove the fleece filter bag
Illustration
Release and remove the suction head.
Pull out the fleece filter bag on the
flange towards the top.
Fold in the lock latch and tightly close
the fleece filter bag.
Insert and lock the suction head.
– To suck wet dirt, first remove the fleece
filter bag.
General
– If wet dirt is vacuumed with the uphol-
stery or crevice nozzle, or if mostly wa-
ter is suctioned from a container it is
recommended not to activate the "man-
ual filter dedusting" function.
– After the wet vacuuming: Clean the car-
tridge filter with the filter cleaning. Clean
the container with a damp rag and dry it.
Clip connection
Illustration
The suction hose is equipped with a clip
system. All accessories with a nominal
width of 1.38 in (35 mm) can be connected.
Turning on the Appliance
Plug in the mains plug.
Set the main switch to the desired pro-
gram.
– 5
EN
Operation
Main switch
Appliance OFF
Appliance ON
Semi-automatic filter dedust-
ing: ON
Socket: OFF
Appliance ON
Semi-automatic filter dedust-
ing: ON
Socket: ON
9