Idiomas disponibles
Idiomas disponibles
PROTECTION LIMITATIONS
General Use:
Truant Boots are intended to protect against ambient conditions without excessively impairing the user's ability to control the motorcycle while
operating the foot controls. Truant Boots are designed with safety and dexterity in mind. Truant Boots are considered to be PPE because they are
designed and manufactured to provide
limited
protection to the foot and ankle during an accident or in the event of a fall from a motorcycle. Additional
particular hazards encountered during an on-road motorcycle accident may include: impacts with the rider's motorcycle, conflicting vehicles, and
other roadside objects. The chances of serious injury are increased if the rider is not wearing certified leg protectors in addition to Truant Boots
and/or if the foot becomes trapped under the motorcycle during a sliding impact. Truant Boots
impacts, traumas caused by severe forces of bending, twisting, torsion, or crushing as the result of striking an object, or traumas caused by extreme
movements. The force levels used in the tests
do not
compare directly to the forces motorcyclists are exposed to in real-world accidents, therefore,
products that meet the requirements of the Directive 86/686/EEC may only reduce the severity of some minor injuries. No protective footwear, can
offer complete protection against all injuries, the principle is to create a product that will help to reduce the risk of injury to the area, for which, the
PPE was designed to provide limited protection.
Misuse that will degrade Truant Boots performance:
Truant Boots must be worn to provide any protection. Improper use of the Truant Boots can seriously compromise effectiveness and reduce
performance. In order for the Truant Boots to retain their original protective capabilities only use the Truant Boots for the purposes described in the
"Use Restrictions and Limitations" section of this user manual. Never tamper with any part of the boots. Never bend or twist the boots excessively as
this constitutes improper use. Do not paint the boots or use colorants of any nature.
Environmental conditions that will degrade Truant Boots performance:
Contamination with foreign substances and/or improper care can seriously compromise the Truant Boots' effectiveness and reduce their performance.
Do not expose the Truant Boots to extreme, direct sunlight or extreme moisture. Do not expose the Truant Boots to extremely high or low temperatures
like those found in a closed car or outdoor storage.
CARE INSTRUCTIONS:
Cleaning:
Use a suede/leather safe cleaner on the exterior leather portions of the boot only. Suede/leather safe cleaners can be found at most shoe repair
locations or retail stores specializing in leather apparel. Use a rag dampened with clean water to wipe other exterior portions of the boot (buckles or
sole). Note that suede/leather safe cleaner may darken the leather of the boot. Be sure to test any suede/leather safe cleaner on an inconspicuous
location, first, before cleaning the boot. Do not use solvents or other toxic substances to clean the Truant Boots. Do not use hair dryers or other heaters
to dry the boots after cleaning.
08
SAFETY WARNINGS
will not
prevent traumas caused by high-energy
Maintenance:
Regularly condition the exterior leather portions of the boots with a quality suede/leather-safe conditioner. Apply suede/leather safe conditioner to
exterior leather portions only. Do not apply leather conditioner to, boot interior, buckle, or sole. Suede/leather safe conditioners can be found at most
shoe repair locations or retail stores specializing in leather apparel.
Storage:
Store the boots in a dry, ventilated area away from sunlight or direct heat. Ensure that they cannot be crushed, hit, dropped, or otherwise damaged by
impact, and that they are not stored under heavy objects. Do not store the boots with their weight distributed across a few, single points only. If wet
after use, before storing, dry boots in a ventilated space at room temperature; do not use hair dryers or other heaters.
Transport:
When transporting the boots do not leave themt in a closed car for long periods of time and expose them to extremely high or low temperatures. Ensure
that they cannot be crushed, hit, dropped, or otherwise damaged by impact and that they are not transported under heavy objects.
Spare parts:
Replacement buckle kits are available from Icon® retailers.
Disposal:
At the end of the Truant Boots' useful life, do not discard them into the environment. Dispose of them according to your local disposal requirements.
MATERIALS CONTENT:
This product contains no known
harmful substances.
SAFETY WARNINGS
WAIVER AND RELEASE BY OWNER
NO PERSONAL PROTECTIVE EQUIPMENT IS ABLE TO SAFEGUARD AGAINST ALL IMPACTS. NO PERSONAL PROTECTIVE EQUIPMENT CAN
OFFER COMPLETE PROTECTION AGAINST ALL INJURIES. MOTORCYCLING IS INHERENTLY DANGEROUS IN NATURE AND USE OF THIS
EQUIPMENT CANNOT PREVENT INJURY OR DEATH. WHEN USING THIS EQUIPMENT, THE USER ASSUMES ALL RISK ASSOCIATED WITH
THIS ACTIVITY, WHICH MAY CAUSE INJURY OR DEATH. THE USER HEREBY WAIVES ALL CLAIMS AGAINST ICON® (A DIVISION OF LEMANS
CORPORATION) AND LEMANS CORPORATION FOR DEATH OR INJURY TO HIS OR HER PERSON AND HEREBY COVENANTS TO NOT SUE FOR
ANY CLAIMS ARISING AS A RESULT OF INJURY OR DEATH WHILE USING ICON® PRODUCTS.
09
