STEP 2A Attach Wall Plate
CAUTION:
Avoid potential
personal injury or property damage!
● Drywall covering the wall
must not exceed 5/8 in. (1.5 cm)
● Minimum wood stud size:
nominal 2 x 4 in. (5.1 x 10.2 cm)
actual 1 ½ x 3 ½ in. (3.8 x 8.9 cm)
● Minimum horizontal space
between fasteners:16 in. (40.6 cm)
● Stud centers must be verified
4
POSITION TEMPLATE
4X
07
To calculate your precise wall plate location, check out our
TIP:
HeightFinder at sanus.com [www.sanus.com/1172].
6
OPEN COVERS
8
Max. 5/8 in. (1.5 cm)
1
LOCATE
Visit
HeightFinder™
sanus.com
/1172
P
08
P
Wood Stud
Installation
Min. 1 ½ in. (3.8 cm)
Min. 16 in. (40.6 cm)
2
VERIFY
5
DRILL
4X
07
Be sure you drill into the CENTER of the stud.
CAUTION:
7
SECURELY TIGHTEN
08
09
07
CAUTION:
Avoid potential personal injury or property damage!
All four lag bolts
MUST BE firmly tightened to prevent unwanted
09
movement of the wall plate
fastened to the wall before continuing on to the next step.
Min. 3 ½ in. (8.9 cm)
3
MARK
3 ½ in. (9 cm)
7/32 in.
(5.5 mm)
4X
. Ensure the wall plate is securely
08
Go to STEP 3 on PAGE 10.