Tabla de contenido
Adjustments
EXTEND / RETRACT -- ONLY IF NECESSARY
Avoid potential personal injury or property damage!
CAUTION:
DO NOT remove screws
TIP:
slight adjustment.
ONLY if needed, adjust the extension/retraction arm tension with
screw
using hex key
13
E
LEVEL ADJUSTMENT
1
2
14
12
CAUTION:
Screw
1. Loosen screw
12
.
2. Level your TV with screw
3. Tighten screw
12
.
12
13
E
E
, only turn enough for
.
3
L
12
MUST be loosened before STEP 2.
12
L
.
TV LATERAL SHIFT
CAUTION
Do NOT adjust the arm position from center for concrete
applications.
Arm
11
MUST remain centered in wall plate
concrete applications!
For wood stud applications ONLY:
1.
Remove the TV (See PAGE 13).
2.
Open cover strips
3.
Loosen but do not remove, locking screws
4.
Slide arm
5.
Tighten locking screws
CAUTION:
property damage! Always make sure both
are tightened so the TV is securely fastened to wall plate
6.
Close the cover strips
TILT ADJUSTMENT
14
NOTE:
If you do not intend to adjust the tilt for different viewing locations,
you can tighten the tilt tension knob
movement. If needed, use hex key
Your TV should adjust easily when moved, then stay in place.
Adjust the tilt tension knob
HEAVY
! You may need
assistance with this step.
: Avoid potential injuries or property damage!
.
P
to the desired position.
11
S
.
Avoid potential personal injury or
,then hang your TV (see STEP 3).
P
T
, to prevent unwanted
T
to tighten more firmly.
14
if your TV naturally tilts up or down.
T
08
for all
.
S
locking screws
S
.
08
14
Tabla de contenido
