Tabla de contenido
STEP 2B Attach Wall Plate
CAUTION:
Avoid potential personal injury or property damage!
●
Mount the wall plate
08
●
Minimum solid concrete thickness: 8 in. (20.3 cm)
●
Minimum concrete block size: 8 x 8 x 16 in. (20.3 x 20.3 x 40.6 cm)
●
For concrete applications, arm
centered (horizontally) in wall plate
when selecting the wall plate location
CAUTION:
Avoid potential personal injury or property damage!
Install lag bolts into
the slots AS SHOWN.
Three (3) lag bolts
at the top.
One (1) lag bolt
at the bottom.
2
DRILL
3X
1X
CAUTION:
Never drill into the mortar between blocks.
Never drill into the mortar between blocks.
CAUTION:
4
OPEN COVERS
directly onto the concrete surface
(STEP 3) must remain
11
. Keep this in mind
08
3
X
4
#
(Center)
2
6
#
#
1
3
5
#
#
#
1
2
3
#
#
#
4
#
(Center)
1
X
3 ¾ in. (9.5 cm)
3/8 in.
(10 mm)
07
P
08
P
Solid Concrete or Concrete Block Installation
1
POSITION TEMPLATE
3X
7
07
#
TIP:
TIP:
3
3
INSERT
CAUTION:
CAUTION:
5
SECURELY TIGHTEN
09
CAUTION:
All four lag bolts
movement of the wall plate
fastened to the wall before continuing on to the next step.
1X
To calculate your precise wall plate location, check out our
HeightFinder at sanus.com [www.sanus.com/1172].
4X
10
Be sure the anchors
the concrete surface.
4X
08
Avoid potential personal injury or property damage!
MUST BE firmly tightened to prevent unwanted
09
. Ensure the wall plate is securely
08
Visit
HeightFinder™
sanus.com
/1172
07
14
are seated flush with
10
9
Tabla de contenido
