Sanus BXT2 Manual De Instrucciones
  1. Manuales
  2. Marcas
  3. Sanus Manuales
  4. Montajes de TV
  5. BXT2
  6. Manual de instrucciones
Sanus BXT2 Manual De Instrucciones

Sanus BXT2 Manual De Instrucciones

Ocultar thumbs

Enlaces rápidos

THANK YOU FOR CHOOSING SANUS
THE #1 TV MOUNT BRAND IN THE US.
BXT 2 Instruction Manual
loading

Manuales relacionados para Sanus BXT2

Resumen de contenidos para Sanus BXT2

  • Página 1 THANK YOU FOR CHOOSING SANUS THE #1 TV MOUNT BRAND IN THE US. BXT 2 Instruction Manual...

  • Página 2: Lo Haremos Sin Estrés

    We’ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-800-359-5520 (UK: 0800-056-2853) We’re ready to help! Lo haremos sin estrés Si tiene preguntas mientras realiza la instalación, llámenos. 1-800-359-5520 (Reino Unido: 0800-056-2853) Estamos listos para ayudarlo. Milestone AV Technologies and its affi liated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete.
  • Página 3 Does your TV No — Perfect! (including accessories) 250 lbs. weigh MORE than Yes — This mount is NOT compatible. Visit MountFinder.Sanus.com or call 1-800-359-5520 (113.3 kg) 250 lbs. (113.3 kg)? (UK: 0800-056-2853) to fi nd a compatible mount. What is your...
  • Página 4 Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer;...
  • Página 5 Parts and Hardware for STEP 2 Tool for Adjustments Wall Plate Hex Key 3/16 in. Lag Bolts 5⁄16 in. x 2 3⁄4 in. For concrete installations ONLY CAUTION : Do not use in drywall or wood Concrete Anchor UX10 x 60R...
  • Página 6 Attach Brackets to TV STEP 1 1.1 Screw Diameter 1.2 Determine Spacers and Screw Length Hand thread screws into Use no spacers for: Spacers supplied for: the threaded inserts on the ● Round (irregular) back TVs back of your TV to determine Flat back TVs (AND TV which screw diameter (M6,...
  • Página 7 1.3 Measure VESA Height to Determine TV Bracket Configuration TV VESA ≤ 400mm TV VESA > 400mm > 400 mm (15 3/4 in.) ≤ 400mm (15 3/4 in.) Go to STEP 1.4 Assemble TV bracket on PAGE 8 extensions to fit your TV VESA height.
  • Página 8 1.4 Attach TV Brackets Center the TV brackets over your TV hole pattern as shown - making sure the brackets are level. NOTE: The tilt tension knob TV brackets should be oriented to the outside edges. Install using the spacer, TV screw and washer combination you selected for your TV. SCREW AND WASHER SPACER, SCREW AND WASHER Adjust...
  • Página 9 STEP 2 Attach Wall Plate to Wall For TV VESA width greater than 700 mm, extend the wall plate to accommodate the TV brackets. > 700 mm (27 1/2 in.) silver screws silver screws Min. 16 in. Min. 16 in. CAUTION: Avoid potential personal injuries and property damage! (406 mm)

  • Página 10: Wood Stud Installation

    Min. 1 1/2 in. (38 mm) NOTE: For assistance in determining wall plate location, see Height Finder at sanus.com. Min. 16 in. (406 mm) FOR EXTENDED WALL PLATES: You MUST install 2 lag bolts...
  • Página 11 Drill the four pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. IMPORTANT : Pilot holes must be drilled to a depth of 2 3/4 in. (70 mm). Be sure you drill into the center of the stud. Install the wall plate using four (or six) lag bolts .
  • Página 12 16 in. (406 mm) out from center, for a minimum of 6 lag bolts total. NOTE: For assistance in determining wall plate location, see Height Finder at sanus.com. Drill six pilot holes using a 3/8 in. (10 mm) diameter drill bit.
  • Página 13 Insert six anchors CAUTION: Be sure the anchors are seated flush with the concrete surface. Install the wall plate using six lag bolts . Firmly tighten all lag bolts until they are pulled flush against the wall plate CAUTION: Avoid potential personal injury or property damage! All lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate .
  • Página 14 Attach TV to Wall Plate STEP 3 HEAVY! You may need assistance with this step. Hook the TV/brackets onto the wall plate Rest the TV into place against the wall. Press the bottom of the TV against the wall plate until the latches lock the TV in place.
  • Página 15 Adjustments LEVEL HEIGHT To level your TV, turn the level adjustment screw To adjust the height of your TV, turn the level adjustment screw on the top the top of either TV bracket to raise or lower of BOTH TV brackets to raise or lower the TV.
  • Página 16 TILT TV LATERAL SHIFT Your TV should adjust easily when CAUTION: Avoid potential personal moved, then stay in place. injury or property damage! Adjust the tilt tension knob Slowly slide the TV along the wall plate your TV naturally tilts up or down. to reposition.
  • Página 17 REMOVING THE TV HEAVY! You may need assistance with this step. Disconnect all cables from the TV. To unlock the TV from the wall plate: Pull down and hold both release cords while gently pulling the bottom of the TV away from the wall. CAUTION: Avoid potential personal injury or property damage! To prevent breaking the locking latch: always pull and hold the release cords down while pulling the TV away from the wall.
  • Página 18 Troubleshooting If you are uncertain about your hardware selection, TV Supplied contact Customer Service at 1-800-359-5520. TV supplied spacers Spacers : Use your TV supplied spacer for flat back TVs : Use your TV supplied spacer and spacer for: (AND you want your TV closer to the wall).
  • Página 19 Dimensions in. [mm] TV INTERFACE FRONT VIEW 43.31 [1100.0] FOR SMALL PARTS PANEL 7.87 [200.0] MAX WALL PLATE 52.93 [1344.5] 33.43 [849.1] MIN WALL PLATE 31.50 [800.0] 16.73 TILT RANGE [425.0] 10° WALL PLATE 24.00 ]609.6[ 23.62 [600.0] 17.72 [450.0] 16.00 ESTIMATED 55"...
  • Página 20 No — ¡Perfecto! (incluidos los accesorios) 113.3 kg pesa más de Sí — Este soporte NO es compatible. Visite MountFinder.Sanus.com o llame al (250 lb) 1-800-359-5520 (Reino Unido: 0800-056-2853) para encontrar un soporte compatible. 113.3 kg (250 lb)? ¿Tabiques de yeso ¿Hormigón sólido...
  • Página 21 ESPAÑOL PASO 1 Fijar la placa de sujeción al televisor VER PÁGINA 6 1,1 Seleccione el diámetro de los tornillos para el televisor Enrosque manualmente los tornillos en los encastres roscados del dorso del televisor a fin de determinar qué diámetro de tornillos (M6 o M8) utilizar.
  • Página 22 NOTA: Si necesita ayuda para determinar la ubicación de la placa mural, utilice la herramienta HeightFinder disponible en sanus.com. Haga los cuatro orificios guía con una mecha de 5,5 mm (7/32") de diámetro.

  • Página 23: Solución De Problemas

    Si es demasiado corto, no sostendrá el televisor. Si es demasiado largo, dañará el televisor. • • . Use los separadores proporcionados con el televisor y los separadores Sanus para: televisores con dorso irregular o redondeado dejar un espacio adicional para cables NOTA: Se pueden utilizar tornillos M8 sin la arandela para obtener un enrosque adecuado adicional.
  • Página 24 If you ever have questions about your SANUS product, give us a call at 1-800-359-5520. We're ready to help! If you ever have questions about your SANUS product, give us a call at 1-800-359-5520. We're ready to help! ‘Monthly prize’...