Wood Stud Installation - Sanus FSF110 Manual Del Usuario

STEP 2A Attach Wall Plate
CAUTION:
Avoid potential personal injury or property damage!
●
Drywall covering the wall must not exceed 5/8 in. (16 mm)
●
Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1 ½ x 3 ½ in. (38 x 89 mm)
1. Locate your stud. Verify and mark the center of the stud by finding the stud edges using an awl, a thin nail, or an edge to edge stud finder.
2. Position the wall plate template
3. Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. Remove wall plate template
IMPORTANT: Be sure to drill into the center of the stud.
IMPORTANT: Pilot holes must be drilled to a depth of 2 ½ in. (63.5 mm).
1
≤ 16 mm
(5/8 in.)
10
at your desired height and line up the holes with your stud center line. Level the template and tape in place.
12
2

Wood Stud Installation

. 12
NOTE: TV shifts 21.9 mm (7/8 in.) to the right
or left when in the home position. Consider this when
selecting the location of your wall mount.
3
12
12
21/2 in. ( 63.5 mm)
7/32 in.
(5.5 mm)