Changing The Internal Light; Reversing The Door Swing - ROMMER COMBI CM-335 A+ Manual Instrucciones

HUMMING, PURRING OR PULSATING
This is the compressor motor working, as it pumps the refrigerant around the system.
Servicing
This product should be serviced by an authorized engineer and only genuine spare parts
should be used.
Under no circumstances should you attempt to repair the appliance yourself.
Repairs carried out by inexperienced persons may cause injury or serious malfunctioning.
Contact the local store where your purchase was made.
When the appliance is not in use for long periods, disconnect from the electricity supply,
empty all foods and clean the appliance, leaving the door ajar to prevent unpleasant
smells.

Changing the internal light

6. Before carrying out the bulb replacement always press and turn the thermostat control
to dial to position 0, then disconnecting the mains supply.
7. Hold and lift up the light bulb cover.
8. Remove the old bulb by unscrewing it in an anti-clockwise direction.
9. Replace with a new bulb (2W) by screwing it in a clockwise direction marking sure that
it is secure in the bulb holder.
10. Refit the light cover and re-connect your Fridge/Freezer to the mains supply and
switch on.

Reversing the Door Swing

To change the opening direction yourself, please follow these instructions:
Tools required: Philips style screwdriver / flat bladed screwdriver / Hexagonal spanner
First：Remove the door of refrigerator and freezer.
a．Use the tool remove a bolt of hinge cover；
24