Cleaning Before Use; Before Switching On - ROMMER COMBI CM-335 A+ Manual Instrucciones

Leveling the Fridge/Freezer
If the Fridge/Freezer is not level, the door and magnetic seal alignment will be affected
and may cause you Fridge/Freezer to work incorrectly. Once the Fridge/Freezer is placed
in its final location, adjust the leveling feet at the front by turning them.

Cleaning before use

Wipe the inside of the Fridge/Freezer with a weak solution of bicarbonate of soda. Then
rinse with warm water using a damp sponge or cloth. Wash the baskets and shelves in
warm soapy water and dry completely before replacing in the Fridge/Freezer. The external
parts of the Fridge/Freezer can be cleaned with wax polish.
on cleaning.
Before plugging in YOUMUST
Check that you have a socket which is compatible with the plug supplied with the
Fridge/Freezer. If not see the section called ELECTRICAL INFORMATION on page

Before switching on!

DO NOT SWITCH ON UNTIL FOUR HOURS AFTER MOVING THE FRIDGE/FREEZER.
The coolant fluid needs time to settle. If the appliance is switched off at any time, wait 30
minutes before switching back on to allow the coolant fluid to settle.
Before filling your Fridge/Freezer
Before storing foods in your Fridge/Freezer, turn the Fridge/Freezer on and wait for 24
hours, to make sure it is working properly and to allow the Fridge/Freezer to fail to the
correct temperature.
See page 10 for more details
16
11.