mabe Aqua Saver LMH19585XPNYS0 Instructivo página 69

Operating
Possible cause
problems
You took too long to unload the
•
The clothes
washing machine once the
come out
cycle was complete.
wrinkled or
tangled.
You did not arrange the load
•
and/or
washing machine.
Improper cycle selection.
•
The clothes
•
Garments that generate fluff
come out
were mixed in with garments
that do not, for example,
towels and sweatshirts, with
dress shirts, t-shirts, pants,
blouses, etc.
• If your washing machine
Wash cycle
machine released too much
takes too
foam during the spin cycle; it
long.
will try to eliminate the foam
by re-rinsing, thus prolonging
the cycle.
•
Washing
The amount of water used by
machine does your
not save
depends on the cycle you
water.
select and the amount of
clothes you load in it.
What to do
•
•
overloaded the
•
•
•
•
•
•
•
•
•
•
•
washing machine
Remove the clothes as soon as the washing
has been completed. Unloading the machine as
soon as the cycle ends lowers the amount of
wrinkles.
To reduce tangles and wrinkles, it is important to
arrange the clothes according to the user manual or
quick guide.
Load the washing machine according to the
suggested laundry load table.
Use the proper cycle according to the type of
clothes.
You can reduce the amount of wrinkles through the
spin knob, selecting the gentle position.
The use of softener also reduces the level of
wrinkles.
To minimize even further the amount of wrinkles, it
is recommended to dry in a dryer.
Separate the clothes that release fluff from the
clothes that do not. Wash separately.
Reduce the agitation time with the knob of level of
dirtiness.
Always use the proper cycle for each type of
garment. The cycles that can help you reduce the
release offluff are: delicates, quick, color, and
towels/sheets.
Reduce the amount of laundry detergent you use.
Preferably use low foam liquid detergent.
To maximize water savings use the ecological rinse
cycle.
69