mabe Aqua Saver LMH19585XPNYS0 Instructivo página 67

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Operating
Possible cause
problems
It is disconnected or there
The washing
is no power.
machine takes
Closed water supply.
The hoses are twisted or
obstructed.
The filters of the entry valve
are blocked.
Low water pressure.
You only connected
cold water hose.
The washing
The draining hose is twisted
machines does
or obstructed.
It has not finished draining
the water or has not
too long to
spinned the clothes.
In the soak cycle, the
washing machine does not
drain the water. This is
normal.
Only the TOWELS/SHEETS,
The washing
EXPRESS WASH, COLOR and
machine does
BEDSPREAD cycles carry
out
heavy duty
program because they are
defined this way.
Washing machine
The
makes too much
makes a "clac clac" impact
noise.
You hear a gurgling noise
during the draining cycle
(spin).
Your washing machine is
not leveled.
An object could be blocking
Lid does not close
the lid lock.
the
the
heavy
duty
washing
machine
What to do
Check that the cord is properly plugged in and that
there is power in the area where you live.
Open the cold and hot water taps completely.
Check the hoses and adjust them.
Close the water taps, disconnect the hoses
and clean the filters.
Check to see if you have any other tap
open and close it.
If you have a cold water supply, use a Y-type
adaptador to the tap outlet and connect the
two hoses to the washing machine as indicated
in the filling hose section of this manual.
Properly adjust the draining hose.
Check if the display shows an E3 failure code and
if the indicator lights are flashing, go to the
failure code section.
To drain the water you can use the "extra spin"
cycle.
If you want a particular wash cycle to carry out
the Heavy Duty program, follow these steps:
First select the wash cycle, then select the
heavy duty option with the personal touch
button and finally press the start button.
The noise you hear is normal and inherent in the
operation of the washing machine.
This is a normal sound of the draining pump.
Your washing machine has leveling legs and
you can adjust the height of each one to level it;
restart once your washing machine is leveled.
Remove the object to unblock the lid lock and
close the lid.
67

Hide quick links:

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Aqua saver lmh19585xpnyu0Aqua saver lmh20186zggt

Tabla de contenido