Problem Solutions - mabe Aqua Saver LMH19585XPNYS0 Instructivo

Problem solutions

Operating
Possible cause
Problem
Light intensity
Your house does not have a
lowers
proper electrical installation.
This is normal when the
Can not open
washing
the wasing
performing a wash cycle; it
machine lid
has a lid lock that prevents
opening it for safety reasons.
•
Observe
Normal
little movement
washing system.
while washing
clothes
•
You selected the wrong
wash cycle.
• Excessive load.
•
If you selected the soak
cycle, it has gentle agitation,
so little movement of the
clothes is normal.
•
During the Normal
wash cycle, it has washing system.
from traditional
washing machines
The washing •
The washing machine is
machines does
disconnected or there is no
not run on
power.
"wash".
•
The washing machine does
not introduce the water.
•
There is no water supply.
You did not press the
•
start/pause button.
•
The fuse is blown or the
circuit
(switch or chip) in your home.
66
• The lid is open.
What to do
Ensure using the washing machine during the day, or
have the less amount of appliances connected as
possible. Consult an electrician.
You can immediately open the lid using the
machine is
start/pause button. If the basket is turning, the lid
lock will automatically be released after the basket
stops.
• The new washing system is designed to provide
with this new
excellent washing performance, reducing rough
treatment to garments.
• Select the cycle according to the type of clothes.
•
Review the recommended laundry load table in
this instruction manual.
•
Arrange the clothes according to this instruction
manual in the section,"how to load the washing
machine".
•
The washing machine has specialized cycles to
wash different types of clothes, select the one
that is appropriate for the clothes that you are
going to wash.
with this new
The new washing system is specially designed
to provide excellent washing performance,
reducing rough treatment to garments.
•
Check that the cable is plugged in and that there is
power in the area where you live.
• Open the cold and hot water taps completely.
Check that your washing machine hoses are
•
properly connected to the water taps as
indicated in the installation section of this
manual.
• Wait until the water flow is completely
reestablished.
• Press the start/pause button.
breaker tripped